CD-Soft Educational Resources
Your cart is empty
FreeCall 1800 634 050

Previously Viewed
UP X5 3D Printer (Pre-order)
 ex GST
 inc GST
SKU: 56185677
Product Description

UP X5 3D Printer
Coming Soon Pre-order Now

Pre-order the all-new X5 3D Printer
In order to secure your order, a pre-order deposit of $594 inc GST is required. Once stock is ready for dispatch, full payment will need to be made to finalise the order.


Contin-U-Print Technology
When a 3D print has been completed, the X5 automatically ejects the print platform out of the printer. A new platform is then loaded and then starts printing the next job from the print queue. The user then cleans off the completed print platforms, then they are loaded back into the printer. The X5 supports up to 2kg spools and can automatically pause and be resumed if it runs out of filament or there is a power cut.

Total Control
Checking print job status has never been easier the X5’s large 7” LCD touch screen reports print queue progress and the printer’s transparent top makes visual build confirmation effortless. 

Three USB Ports
One USB port is for loading print jobs stored on a USB memory stick. Another USB port is for computer connectivity and still another USB port is for optional add-ons, such as a USB camera for remote print monitoring.  

Dual Filtration System  
Both PLA and ABS are “high  emitters“ of UFP and VOC and it is essential for Health & Saftey compliance that you have a safe enviorment to print in. Manufacturing with plastic doesn’t have to be unhealthy. The X5 includes Tiertime’s 2018 air filtration system, specifically designed for large build chambers. Air is recirculated through separate HEPA and activated carbon filters, radically reducing toxic UFP and VOC emissions.


  • Printing Technology: MEM (Melted Extrusion Modelling)
  • Extruder: Single
  • Build Volume: 180 × 230 × 200 mm (X,Y,Z)
  • Nozzle Diameter: 0.2mm, 0.4mm, 0.6mm
  • Layer resolution: 0.05/0.1/0.15/0.2/0.25/0.3/0.35/0.4
  • Extruder Maximum temperature: 299℃
  • Extruder Maximum travel speed: 200 mm/sec
  • XYZ accuracy XYZ: 2, 2, 0.5 micron
  • Connectivity: USB cable, Wi-Fi, LAN and USB Stick
  • Touch Screen: 7″ colour LCD screen
  • Printed object accuracy: ±0.1mm/100mm
  • Build plate maximum temperature: 100℃
  • Calibration and Leveling: Manual Calibration and Leveling
  • Print Surface: UP Perfboard, Heated
  • Enclosure: Full
  • Dual Filtration System: HEPA and active carbon filters
  • Print Resume on Power Interrupt: Yes
  • Pause to change the type of filament: Yes
  • Out of filament detection: Yes
  • Filament Compatibility: UP Fila ABS, ABS+, PLA, TPU and more
  • Filament Diameter: 1.75mm

© 2015-19 CD-Soft. All rights reserved.InstagramTwitterFacebook